User Tools

Site Tools


pypilot_calibration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
pypilot_calibration [2018/08/30 01:32]
73.128.99.196 created
pypilot_calibration [2019/07/25 13:52] (current)
seandepagnier
Line 1: Line 1:
 +This page is specific to the "​pypilot_calibration"​ script. ​  First see the [[calibration]] guide.
  
-To get started, the sensors should calibrated.  ​To access the calibration either click on the calibration button on the openplotter pypilot tab, or run "​pypilot_calibration <​hostname>"​ from a console.+To access the calibration either click on the calibration button on the openplotter pypilot tab, or run "​pypilot_calibration <​hostname>"​ from a console.
  
 The mpu9255/​mpu9250 (these are on the moitessier hat) are usually factory calibrated for the accelerometer. ​  If you have mpu9255 sensors with orange capacitor (not yellow) they require this calibration as well as most other sensors. The mpu9255/​mpu9250 (these are on the moitessier hat) are usually factory calibrated for the accelerometer. ​  If you have mpu9255 sensors with orange capacitor (not yellow) they require this calibration as well as most other sensors.
pypilot_calibration.1535592735.txt.gz ยท Last modified: 2018/08/30 01:32 by 73.128.99.196