User Tools

Site Tools


pypilot_arduino_weathersensors

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
pypilot_arduino_weathersensors [2022/03/02 08:35]
seandepagnier
pypilot_arduino_weathersensors [2022/03/02 08:46] (current)
seandepagnier
Line 19: Line 19:
 </​code>​ </​code>​
  
-If there is a failure, repeat the "make upload"​ command several times. ​  It may be necessary to modify the Makefile and adjust the DEVICE or BAUDRATE. ​  Some boards use a BAUDRATE of 115200, others will use 57600.+If there is a failure, repeat the "make upload"​ command several times. ​  It may be necessary to modify the Makefile and adjust the DEVICE or BAUDRATE. ​  Some boards use a BAUDRATE of 115200, others will use 57600.   Some boards may use the atmega32 rather than atmega328. ​ In this case edit Makefile and change the MCU.
  
pypilot_arduino_weathersensors.1646210118.txt.gz ยท Last modified: 2022/03/02 08:35 by seandepagnier