pypilot_arduino_weathersensors
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
pypilot_arduino_weathersensors [2022/03/02 08:31] seandepagnier |
pypilot_arduino_weathersensors [2022/03/02 08:33] seandepagnier |
||
|---|---|---|---|
| Line 6: | Line 6: | ||
| <code> | <code> | ||
| $ sudo apt install arduino | $ sudo apt install arduino | ||
| + | $ git clone --depth=1 https://github.com/pypilot/pypilot | ||
| + | $ cd pypilot/arduino/weathersensors | ||
| + | $ make upload | ||
| </code> | </code> | ||
| + | |||
| + | If there is a failure, repeat the "make upload" command several times. It may be necessary to modify the Makefile and adjust the DEVICE or BAUDRATE. Some boards use a BAUDRATE of 115200, others will use 57600. | ||
| + | |||
pypilot_arduino_weathersensors.txt ยท Last modified: 2022/03/02 08:46 by seandepagnier
Page Tools
